Skip to main content

HP LaserJet Pro MFP M28a Not Scanning on Mac

HP LaserJet Pro MFP M28a Scan Function Does Not Work Out-of-the-Box on Mac Computers


HP LaserJet Pro MFP M28a


HP LaserJet Pro MFP M28a served my expectations as far as printing is concerned -- good crisp black and white prints. Probably a legacy of the long experience of HP products as far as laser printing is concerned. For printing, I am pleased with it.

Copying is also good, easy copying with one button copy feature.

HP LaserJet Pro MFP M28a is a multi-function printer which can also perform scanning and this is where it failed - it does not work with Mac computers. I have two macs and it does not work on both. I have done many troubleshooting and there is no solution found yet, even an HP employee responding to the official HP community stated that this model is not supported on Mac with the latest macOS (Mojave). I am not prepared to downgrade my macOS just to accommodate this printer.

HP LaserJet Pro MFP M28 is working on a Windows PC.

Here is another feedback that surprised me, this model actually worked on Mac if you use a third-party software called Vuescan.  I downloaded a trial copy of it and I confirm it works, so clearly HP has not provided the right software for this printer because a third-party software developer was able to make it work and the out of the box software and the online downloadable software from HP is not working.

I also have another Brother Multi-function printer/scanner which works on my mac. So HP LaserJet Pro MFP M28 does not work with macOS Mojave and HP and Apple have not collaborated well as far as this is concerned. For that, I give this a 2-star rating. If you are planning to use this on a mac, I don't recommend it.


Update: 28 March 2019
Due to my posting in the HP Support Community, I received a private message from somebody who calls himself an "HP Employee" who gave me a new firmware that is not found in the official HP support website.  This new firmware now worked on my Mac.  I am surprised that HP still has the old 2018 firmware posted and they have not published the corrected firmware yet on their HP Laserjet Pro MFP M28 official support site so I'm holding my final verdict on this one until such time we see it public.

Comments

  1. WilDecember 12, 2019 at 8:57 PM

    This comment has been removed by the author.

    ReplyDelete
  2. WilDecember 12, 2019 at 8:58 PM

    Thank you for your explanation. You saved me a lot of time. Could you share this firmware with me? It is still not available on their website.

    ReplyDelete
  3. UnknownDecember 18, 2019 at 1:37 AM

    Thank you for your information. I have the same problem, too. Could you share this firmware with me? It is still not available on their website.

    ReplyDelete
  4. gaming UAEAugust 13, 2021 at 1:37 AM

    Where can buy best HP M28a Printer in Uae, HP M28a LaserJet Pro Printer in Uae, Hp Monochrome Printer in Uae
    https://gccgamers.com/hp-m28a-laserjet-pro-monochrome-printer-w2g54a.html

    ReplyDelete

Post a Comment

Popular posts from this blog

Panasonic Lumix Zoom Lens Became Useless After Attempted Repair by Chain Technology Service Corp

Panasonic Lumix Zoom Lens Became Useless After Attempted Repair by Chain Technology Service Corp This Panasonic Zoom Lens 100-300mm served me well for a few years.  But in February 2020, when I extend the zoom to beyond 200mm, the lens is not focusing.   It only works when the lens is zoomed only between 100-200mm. So I brought it to an authorized Panasonic service center. February 20, 2020: I brought the lens to: CHAIN TECHNOLOGY SERVICE CORPORATION, Yutivo Bldg. # 265 San Vicente St., Binondo Manila. 1006 Phone : (632) 8711-4009 March 6, 2020: Chain Technology representatives advised me that I need to pay them ₱1,200 to order parts for the lens. I did. June 23, 2020: I made a follow-up but the lens is not yet done. They told me that the part needed has arrived. But they are still waiting for the technician to report to work to get it done. Their excuse -- it was a pandemic. Fine. Accepted. Aug 24: I. made a follow-up again. Still not fixed. Sept 24: I was advised that ...
Post a Comment
Read more

Globe Sets Your Speed to ONE PERCENT When You Hit Data Cap Limit

Globe Broadband's Speed Limiter Upon Reaching Monthly Data Cap Globe's deliberate move to cap speed 60 KBPS.  Yup that is Kilobytes in this day and age. Globe has what it calls "fair use policy" which throttles users speed when you reach their monthly limit.  Now that is fair enough. What I don't find fair is this: 1)  They don't even notify you, your speed just suddenly drops to speed equivalent to dial-up days of the early 90s.  Below is the worst speed I noticed -- 60kbps!   It is averaging at 80kbps.  This is really absurd.   Yes granted that I reach the limit but 80kbps is a punishment, you cannot even load Gmail in 15 minutes with that speed! 2)  They don't even warn you.  How about a text message, or an email, or maybe a working webpage that gives you that warning.  Nothing.  They just choke you without warning.  Maybe they had before or they plan to do it in the future but right...
Post a Comment
Read more